Flag Counter
Showing posts with label corrupted. Show all posts
Showing posts with label corrupted. Show all posts

Tuesday, 24 September 2013

Windows 7 Fails to Boot – Fix Error Code 0×490

Error Code 0×490 indicates bad boot information, which does not let you access Windows 7. In this situation Boot manager is unable to find OS Loader and is stuck at the startup phase. By default or by command, it runs a repair process, which also subsequently fails.
Cause
An error occurred because the Windows 7 may not have been shut down properly, or rebooted automatically. On a Startup, it tried to repair the situation, but failed and was stuck on the repair screen. In the meanwhile, time timer went out and the process was never successfully completed.
Solution: Startup Repair
Boot manager failure obliges a startup repair through the installation or recovery disc. In this solution, your system is recovered by repairing and fixing the missed or corrupted system files. For this purpose, you would need an installation or recovery disc and make sure that BIOS is set to have CD/DVD drive listed first in the boot order. Comply with the further steps given below
  • Insert Installation Disc or Recovery Disc to your CD/DVD Drive
  • Restart and press any key when prompted to boot from the Installation/Recovery disc
  • On the next step, select your Language preferences and click the Next button
  • Click on the link stated as Repair your computer
  • Select the operating system that you want to restore and then click Next button
  • Next screen lists down certain System Recovery options. Among them, select Startup Repair
  • This will scan your computer to attempt to find and fix any Startup problems, automatically
  • To see the detailed summary of scan, click View diagnostic and repair details
  • Click Finish button to restart your system
Startup Repair To Fix WIndows 7 Boot Failure Error Code 0x490
Solution: Master Boot Record
Master Boot Record or MBR is a boot sector, which contains necessary computer codes to start the boot process. A damaged MBR may be a reason for not being able to boot into Windows 7. By the following way, you can troubleshoot and repair MBR and enable a normal boot.
  • Insert Installation/Recovery disc to your CD/DVD drive and boot from it
  • Setup your Language preferences, click Repair your computer, and select the operating system
  • Among the listed System Recovery options, select to launch Command Prompt
  • In the black screen of command prompt, type BOOTREC.EXE /FIXMBR and hit Enter key
  • You can also type BOOTREC.EXE /FIXBOOT to write a boot sector and start Windows normally
How to Fix Error Code 0x490
Precaution
Stop your computer to restart automatically, as this may raise certain problematic issues. Let you system display any error before restarting, if it is causing a reboot. Go to Control Panel and then click Advanced system setting. On its Advanced tab, click to access the Startup and Recovery Settings and Uncheck Automatically restart in System failure.


How to Fix and Restore A Corrupted User Profile

Suppose an instance, when you are trying to access your user account and the system does not allow you, and reporting a corrupt user profile (User Profile Failed to Logon). This could be quite infuriating for you. It is advised not to panic and fix it with real ease. The only way to reclaim your data, files, and media is by creating a new user profile and transfer files from the old corrupted one.

The subject is divided into two separate categories with their applicable procedures. One of these two categories is concentrated on creating a new user profile and the other ones aims in shifting libraries. However, have a last try to access your user account before proceeding with these steps. It is possible that your computer did not read your user profile correctly. To make sure this is not the case, please turn off your computer, and turn it back on, input correct username and password to login. If the problem persists, try following.
Create New Profile
  • Press Windows key in Windows 7 to open Start menu and click to access Control Panel
  • Right click in lower left corner of Windows 8 desktop screen and choose Control Panel
  • Click User Accounts, or User Accounts and Family Safety and then User Accounts
  • Click Manage another account and confirm with Administrative rights
  • Now select Create a new account, type a Name, choose an Account type, and click Create Account
Transferring Files
  • Log in to the Windows with a different user account (other than the newly created)
  • Press Alt key in Windows 7 and click Tools menu to open Folder Options. Access View tab
  • Check Show hidden files and folders & uncheck Hide protected operating system files
  • Open File Explorer in Windows 8, access View tab in the ribbon and check Hidden Items
  • Locate the directory C:\Users\XXXXX (C: is the system drive while XXXXX is your old username)
  • In this folder, select all files and folders except Ntuser.dat, Ntuser.dat.log, and Ntuser.ini
  • Copy all the selected files (Right Click > Copy / Edit > Copy / Ctrl + C)
  • Locate the directory C:\Users\XXXXX (C: is the system drive while XXXXX is your new username)
  • Paste all the selected files (Right Click > Paste / Edit > Paste > Ctrl + V)
  • Log off and log back in with the new User Account
Note: If you are unable to perform these steps cause your administrator profile is not opening, you are advised to boot in safe mode and carefully apply these steps.
All your stuff is now restored in the new user profile. It is better to protect your profile with a password. Carry out regular maintenance checks to avoid such kind of untimeliness.